background image

ENGLISH

9

Switch off the power supply 

Switch off the power supply 

before cleaning

before cleaning

CARE & CLEANING

 

Washing Instructions

•  Do not use benzene, thinner or 

scouring powder.

•  Use only soaps (

pH7) or neutral 

household detergent.

•  Do not use water hotter than 40°C.

INDOOR UNIT

•  Wipe the unit gently with a soft, dry 

cloth.

AIR FILTER

• Air 

fi

 lters cleaning is needed every 

two weeks.

•  Replace any damaged 

fi

 lter.

 Part  no:  CWD001137

  

 

CWD001138

 

Hints

•  

Clean the 

fi

 lter regularly for best 

performance and to reduce power 
consumption. 

•   Please consult your nearest dealer 

for seasonal inspection.

•  It is recommended to vacuum the

fi

 lters every 6 months.

•  For best perfomance, place the 

deodorizing 

fi

 lter under direct 

sunlight for at least six hours every 
six months.

• Replace the 

fi

 lter every 3 years or 

replace any damaged 

fi

 lters.

  Part no: CZ-SAD13P

 

For extended non-use

•  Activate heating for 2~3 hours to thoroughly dry the unit.
•  Turn off the power supply.
•  Remove the remote control batteries.

Vacuum, wash and 
dry the frame.

Remove

Vacuum the super 
alleru-buster 

fi

 lter.

SUPER ALLERU-BUSTER AND 

DEODORIZING FILTERS

Raise and pull to remove. 
Wash and dry.

Vacuum, wash and dry.

Wipe gently.

Remove

Remove

AIR FILTER

AIR FILTER

FRONT PANEL

FRONT PANEL

SUPERSONIC AIR 

SUPERSONIC AIR 

PURIFYING DEVICE

PURIFYING DEVICE

INDOOR 

INDOOR 

UNIT

UNIT

Vacuum the deodorizing 

fi

 lter and place under 

direct sunlight.

Summary of Contents for CS-E18FKR













Reviews: