background image

2

ENGLISH

Safety Precautions

Do not install, remove and reinstall the unit yourself.
Improper installation will cause leakage, electric shock or fire. Please engage an authorized dealer or
specialist for the installation work.

Warning

To prevent personal injury, injury to others and property damage, the following instructions must be followed.

Incorrect operation due to ignoring of instructions will cause harm or damage, the seriousness of which is
classified as follows :

Caution

Warning :

This sign warns of death or serious injury.

This sign warns of injury or damage to property only.

This symbol (with a white background) denotes an action that is
PROHIBITED.

These symbols (with a black background) denote an action that is
COMPULSORY.

The instructions to be followed are classified by the following symbols :

!

!

!

!

Installation precautions

Before operating, please read the following “Safety Precautions” carefully.

This room air conditioner must be earthed.

Improper grounding could cause
electric shock.

Do not install the unit in a place where there
may be explosive gas leaks.

Gas leaks near the unit could cause
fires.

Ensure that drainage piping is connected
properly.

Otherwise, water will leak out.

Caution :

OFF

Summary of Contents for CS-C182KR

























Reviews: