Panasonic CS-A9KKD-2 Service Manual Download Page 92 | Manualshive

Page: 92 / 136

Panasonic CS-A9KKD-2 Service Manual Download Page 92

92

14. Servicing

Mode

14.1 Auto OFF/ON Button

Auto OFF/ON
Button Pressed

Auto OFF/ON

Button Pressed

Auto OFF/ON

Button Pressed

5 sec

5 sec

Auto Operation

Test Run Operation

(Forced Cooling Operation)

Stop

Various Setting Mode

Stop

“Beep”

2 x “Beep”

1

AUTO OPERATION MODE
The Auto Operation will be activated immediately once the Auto OFF/ON button is pressed. This operation
can be used to operate air conditioner with limited function if remote control is misplaced or malfunction.

2

TEST RUN OPERATION (FOR PUMP DOWN/SERVICING PURPOSE)
The Test Run Operation will be activated if the Auto OFF/ON button is pressed continuously for more than 5
seconds. A “beep” sound will be heard at the fifth seconds, in order to identify the starting of this operation.

3

VARIOUS SETTING MODE
The Various Setting Mode will be activated if (within 20 seconds of Test Run Operation) the Auto OFF/ON
button is pressed for more than 5 seconds. 2 “beep” sounds will be heard to identify the starting of this
operation.
Under Various Setting Mode, user could perform the following operation:
i. Press Auto OFF/ON button to toggle remote control receiving sound.
- Short “beep”:  Turn ON remote control receiving sound.
- Long “beep”:  Turn OFF remote control receiving sound.

After Auto OFF/ON button is pressed, the 20 seconds counter for Remote Control Receiving Sound OFF/ON
Mode is restarted.
ii. Remote Control Number Switch.
   - There are 4 types of remote control transmission code could be selected and stored in EEPROM of
    indoor unit. The indoor unit will only operate when received signal with same transmission code from
    remote control. This could prevent signal interference when there are 2 or more indoor units installed
    nearby together.
   - To change remote control transmission code, short or open jumpers at the remote control printed circuit
    board.

Remote Control Printed Circuit Board

Jumper A (J-A)

Jumper B (J-B)

Remote Control No.

Short Open

A

(Default)

Open Open B

Short Short C

(A9/12/18/24KK)

J_

A

J_B

J - A

J - B

(A28KK)

Open Short D

          - During Various Setting Mode, press any button at remote control to transmit and store the desired
             transmission code to the EEPROM.
          - After signal is received, the Various Setting Mode is cancelled and return to normal operation.
          - If there is no code transmitted or Auto OFF/ON button is not pressed within 20 seconds, the
           Various Setting Mode will be cancelled.

«
...
90
91
92
93
94
...
»

Summary of Contents for CS-A9KKD-2









































































































































Reviews:

No comments