Panasonic CS-A24BB4P Service Manual Download Page 62

Page: 62 / 208

NOTES:

- Ensure that the correct button is pressed as simultaneous

pressing of the multiple buttons will not make the setting correct.

- The illustration above is for explanatory purposes only. The

appearance will be different during actual operation.

- Do not operate the remote control with wet hands. Otherwise,

electric shock or malfunction may occur.

- Do not press the remote control buttons with sharp object as this

may damage the remote control.

- Buttons marked with * are not needed for normal operation. If one

of these buttons is pressed by mistake, press the same button
once more to cancel the operation.

- When the power resumed after power failure, the unit will restart

automatically with all the previous settings preserved by the
memory function. (Auto restart function)

Summary of Contents for CS-A24BB4P

















































































































































































































Search results

Summary of Contents for CS-A24BB4P

Reviews:

Brands by name

Popular brands

Panasonic CS-A24BB4P, Service Manual

Search results

Summary of Contents for CS-A24BB4P

Reviews:

Brands by name

Popular brands