Panasonic CR-594-B Page 8 Instruction Manual Download

Page: 8 / 14

A-5

ENGLISH

CHAPTER 2 PARTS AND FUNCTIONS

2.1 FRONT VIEW

➀

DISC TRAY

Accepts a disc.

➁

HEAD PHONE JACK

Headphone can be connected using a 3.5mm stereo mini plug.

➂

VOLUME

Adjusts audio output level of Headphone.

➃

BUSY INDICATOR

Lights when data is being accessed from the disc, or the drive is playing an audio CD.

➄

EJECT / LOAD BUTTON

Ejects and loads the disc tray.

➅

EMERGENCY EJECT HOLE

Insert an instrument such as straightened paper clip into this hole to manually
eject the tray.

(See 4.1)

2.2 REAR VIEW

➀

INTERFACE CONNECTOR

Connects to host computer’s interface connector.

➁

DC (IN) CONNECTOR

➂

AUDIO OUT CONNECTOR (Analog)

➃

JUMPER PIN

Insert the jumper according to the Master / Slave / CSEL drive.

(See the figure in the next page.)

➄

DIGITAL AUDIO OUT CONNECTOR

➀

➁

➂ ➃

➄

➀

➁ ➂ ➃

➄

➅

(Model CR-594-B only)

NOTE:

The serial format of digital data (not Audio data) output functions with some model.

Summary of Contents for CR-594-B















Search results

Summary of Contents for CR-594-B

Reviews:

Related manuals for CR-594-B

Brands by name

Popular brands

Panasonic CR-594-B, Instruction Manual

Search results

Summary of Contents for CR-594-B

Reviews:

Related manuals for CR-594-B

Brands by name

Popular brands