Panasonic CQVX100U - Car Audio - DVD Receiver, Service Manual, Page: 12 / 49

12
5.2. How to Disassemble & assemble
First take off the monitor block
and must be as shown above.
Remove the screws from the 3
spots as shown above labled with
circles.
Take off the metal that fixes the
connecter and remove the screws
from the 2 spots labled with circles.
Remove the screws from the
2spots labled with circles.
Must be situated as shown above
then remove the locks on the flat
cable of the deck.
Remove the deck block and it is
done.
How to assemble
How to disassemble
Insert the flat cable.
(Caution for inserting diagonally)
With pad on the rear side of the deck ass’
y, there must be no gap between the deck
ass’y and the tuner shield case.
Match the connector bracket with the slit of the RCA cord ass’y
and fasten them with 3 screws.
Do not let the ANT receptacle wires get jammed.
Importan
Importan
Match the mounting spots of the deck ass’y and fasten
them with 2 screws.
The deck ass’y must be inside the front plate of the under
cover.
Fasten the 2 parts labeled with a
circle with screws.
cqvx100u.book Page 12 Thursday, April 3, 2008 11:30 AM