E
N
G
L
I
S
H
17
E
N
G
L
I
S
H
18
CQ-DPX152/DP102U
CQ-DPX152/DP102U
26
27
Installation Guide
(Continued)
Remove the removable face plate.
1
Press [
'
] (release button). The removable
face plate will be released.
2
Pull on the right side of the unit.
1
2
Remove the Unit
8
Trim plate
<
<
SOURCE
REP
RANDOM
PWR
EMOTE
Remove the trim plate
8
with a screwdriver.
Pull out the unit while pushing down the lock
lever with a screwdriver.
Remove the unit pulling with both hands.
1
Contact
Main unit
Lock lever
Screwdriver
2
3
4
Switch off the power of the unit.
Anti-Theft System
Install Removable Face Plate
1
Slide the left side of the removable face plate in
place.
2
Press the right end of the removable face plate
until “click” is heard.
Caution:
≥
This face plate is not waterproof. Do not expose it to water or excessive moisture.
≥
Do not remove the face plate while driving your car.
≥
Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.
≥
Do not touch the contacts on the face plate or the main unit, since this may result in poor electrical con-
tacts.
≥
If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
≥
Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or
it might be damaged.
This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.
Place the Removable Face
Plate into Case
1
Switch off the power of the unit.
2
Remove the removable face plate. (
➡
page 26)
3
Gently press the bottom of the case and open
the cover. Place the face plate into the case and
take it with you when you leave the car.
2
1
<
7
Removable face plate case
Release button
Plastic tab
Cutout
Lock lever
