Panasonic CQC500U - CD Receiver With Changer Control, Operating Instructions Manual

Page: 22 / 88

CQ-C500U
22
Audio Setting
1
Press [VOL] (PUSH
SEL: Select) to open
the menu.
2
Press [VOL] (PUSH SEL: Select) to
select a mode to be adjusted.
3
Turn
[VOL] clockwise
or counterclockwise to
adjust.
Notes:
• The sequence and contents of setting items may
depend on the conditions of devices to be connected.
For further information, refer to the
System Upgrade
Guidebook or the instruction manuals for the devices
to be connected.
• To return to the regular mode, press [DISP] .
• If no operation takes place for more than 5 seconds
in audio setting (2 seconds in the volume adjustment,
10 seconds in the SQ adjustment), the display returns
to the regular mode.
• The volume can also be adjusted directly using [VOL]
on the main unit. (  page 12)
• Please refer to page 13 for calling up a preset SQ.
Volume Adjustment
(Setting range: 0 to 40, Default: 18)
1
: Up
2
: Down
Bass Adjustment
(Setting range:

12 dB to

12 dB, 2 dB Step, Default:
Bass 0 dB)
1
: Up
2
: Down
Treble Adjustment
(Setting range:

12 dB to

12 dB, 2 dB Step, Default:
Treble 0 dB)
1
: Up
2
: Down
Note: Do not activate SQ and Bass/Treble at the same
time to avoid causing sound distortion.
SQ Adjustment
(  page 13)
(Adjustable range:

12 dB to

12 dB (by 2 dB))
Setting range:
SQ Low/Bass: ±12 dB (at 60 Hz, 80 Hz, 100 Hz,
200 Hz)
SQ Mid: ±12 dB (at 500 Hz, 1 kHz, 2 kHz,
3 kHz)
SQ High/Treble: ±12 dB (at 8 kHz, 10 kHz, 12 kHz,
15 kHz)
Balance Adjustment
(Setting range: L (left) 15 to R (right) 15 and Center,
Default: Center)
1
: Right enhanced
2
: Left enhanced
Fader Adjustment
(Setting range: R (rear) 15 to F (front) 15 and Center,
Default: Center)
1
: Front enhanced
2
: Rear enhanced
Subwoofer Level Adjustment
(Setting range : mute (

),

6 dB to

6 dB, 2 dB
Step, Default: 0 dB)
1
: Up
2
: Down
Subwoofer Low Pass Filter
(Setting range: 80 Hz, 120 Hz, Default: 80 Hz)
1
: 120 Hz
2
: 80 Hz
Re-master Setting
High-range signal lost through MP3/WMA/AAC
compression is reproduced to more closely recreate the
pre-compression sound.
(Setting range: On/Off, Default: On)
1
: On
2
: Off
Notes:
• At high bit rates, the Re-master function may have
little effect.
• It is only effective for playback of MP3/WMA/AAC data.
Adjustment to each speaker and an optional subwoofer
Audio Menu Display