background image

CQ-5100U

25

    

1

2

3

First complete the electrical connections, and then check them for correctness.(

a

page 27)

The included Mounting Collar 

q

is designed specially for this unit. Do not use it to attach any other model.

Insert Mounting Collar 

q

into the

dashboard, and bend the mounting tabs
out with a screwdriver.

Establish the rear connection of the unit.

After fixing Power Connector, fix the rear of the unit
to the vehicle body by either method (a) or (b)
shown in the previous page.

After installation reconnect the negative
(–) battery terminal.

The tabs to be bent vary depending on
the vehicle.  To securely install the unit,
fully bend a number of the tabs so that
there is no rattling.

Example:

Tab

q

Mounting
Collar

Mounting Holes
Mounting Bolt

Power Connector

Mounting springs (

C

)

Engage the Mounting
Springs (

C

) in the

mounting holes of the
Mounting Collar 

q

firmly.

Mounting Spring

Mounting
Hole

Caution

• We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
• When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands

and fingers.

CQ-5100U  10/8/2007  4:24 PM  頁面 25

Summary of Contents for CQ5100U - AUTO RADIO/CD DECK

































Reviews: