44
45
CQ-VW220W
English
■
USB
Device Not Supported
No playable files exist.
a
Use the type of USB device that is suitable for this unit.
An unsupported USB device was connected.
a
Record files that can be played back on this unit onto the USB device.
Hardware Error
A USB device that exceeds the current capacity that can be supplied was connect-
ed.
a
Use a USB device that has a consumption current of less than 500 mA.
For some reason, an over-current was detected.
a
Switch the Source, and select USB (MP3/WMA) mode again.
a
Check that the USB connector section is not dirty, and that there is no foreign
material.
Read Error
No operation by some cause.
a
Switch the power or ACC ON/OFF.
If this does not solve the problem, unplug
the power cord and plug it in again. In case the unit is still out of order,
con-
sult your dealer. (
a
Installation Instructions)
Decode Error
No operation by some cause.
a
Switch the power or ACC ON/OFF.
If this does not solve the problem, unplug
the power cord and plug it in again. In case the unit is still out of order,
con-
sult your dealer. (
a
Installation Instructions)
File Error
The player for some reason cannot read the file you are trying to play. (File record-
ed in an unsupported file system, compression scheme, data format, file name
extension, damaged data, etc.)
a
Confirm that the USB extension cable is firmly connected, and reconnect if
not. Select a file that the player can read. Check the type of data stored in
the USB device. Format the USB device if necessary.
DRM Protected
A WMA file can be copyrighted.
a
The file protected by copyright is not playable.
No File
Your USB device has no playable file.
a
Download playable file to your USB device.
VW220W̲OI̲01̲eng.qxd 09.2.24 7:26 PM ページ45
