4
5
CQ-VD6505W
English
<YFX994C134ZA>
Lock Cancel Plate
e
2
❏
Transportation Bracket Removal
Be sure to remove the transportation brackets before
use (installation).
Use round head screws (5
mm
ø
x 8
mm) for installation.
(
a
page 7)
Be careful not to lose these screws.
Round Head Screw (5
mm
ø
x 8 mm)
Transportation Bracket
❏
Installation Hardware
(For Installation)
Note:
¡
The number in parenthesis underneath each accessory
part name is the part number for maintenance and
service.
¡
Accessories and their parts numbers are subject to
modification without prior notice due to improvements.
¡
Mounting Collar
w
is mounted on the main unit at
shipment.
¡
Use the supplied screws for installation exclusively. In
case of losing any of them, please order the specific
screw.
Qty.
Diagram
Item
No.
Trim Plate
<YFC054C088ZA>
q
1
Mounting Collar
<YFX214C437ZA>
w
1
Rear Support Strap
<YEFG044C002>
<ZZBISVD6503>
u
1
Round Head Screw
(5 mmø x 8 mm)
i
2
Flat-Head Screw
(5 mmø x 8 mm)
o
6
<ZZBISVD7001A>
Mounting Bolt (5 mmø)
r
1
Tapping Screw
(5
mm
ø
x 16 mm)
t
1
Hex. Nut (5
mm
ø)
y
1
❏
Before Installation
Caution
¡
Do not press the panel forcefully.
¡
Do not scratch the panel with fingernails or any hard
objects.
¡
Do not bump the front panel.
a
Failure to observe the above may damage or
break the glass on the surface of the touch panel.
❏
Installation Hardware
(For
Wiring
)
Qty.
Diagram
Item
No.
Power Connector
(ISO connector)
<YEAJ012890>
!0
1
Reverse Extension Cord
!1
1
Clip Connector
!2
1