26
CQ-RDP472N
23
E
N
G
L
I
S
H
Electrical Connections
Cautions:
¡
Check the connectors provided on your car (see
precaution below) before connecting the system.
¡
This unit is designed for use in a car having a 12-
volt negative ground battery system.
¡
To prevent damage to the unit, be sure to follow the
connection diagram.
¡
Strip about 5 mm of the lead ends for connection
(only non-ISO connector cords).
¡
Do not insert the power connector into the unit
until the wiring is completed.
¡
Be sure to insulate any exposed wires to prevent
short circuiting with the car chassis. Bundle all
cables, and prevent cable terminals from touching
any metal parts.
Precautions (ISO Connector)
¡
The pin arrangement of the power connector
conforms to ISO standard.
¡
The pin arrangement of ISO connectors in some
cars may differ from the ISO standard.
¡
Please check that the pin arrangement of the
connector in your car conforms to ISO standard.
¡
For car types A and B, change the wiring of the
red and yellow leads as shown at below.
¡
After connection, insulate the portions marked
(
C
) with insulating tape.
Note:
For cars other than types A and B, please
consult your local car shop.
C
C
BATTERY 15A
ACC
C
C
BATTERY 15A
ACC
BATTERY 15A
ACC
C
C
ISO
A
B
Standard ISO
Car Type A
Car Type B
A7:
IGN or ACC switched 12 V supply
(Red)
(Yellow)
(Yellow)
(Red)
(Red)
(Yellow)
(Yellow)
(Red)
(Red)
(Yellow)
(Red)
(Yellow)
A4:
IGN or ACC switched 12 V supply
A4:
+12 V Battery (Permanent supply)
A7:
+12 V Battery (Permanent supply)
A7:
+12 V Battery (Permanent supply)
A4:
No connection
Wiring Diagram
Example:
Connection with CD changer CX-DP88N (Option)
A7
A4
y
ISO Antenna
Adapter
(If needed)
CQ-RDP472N
Antenna
CD Changer
Control Connector
(L) (White)
(R) (Red)
RCA Cord
Preamp Out
Connector (Rear)
CD Changer
Input Connector
(R) (Red)
(L) (White)
