Panasonic CQ-RDP101N, Operating Instructions Manual

Page: 12 / 21

22 23
CQ-RDP151/RDP101N
CQ-RDP151/RDP101N
17
E
N
G
L
I
S
H
18
E
N
G
L
I
S
H
Specifications
Note: Specifications and design are subject to modification without notice due to improvements.
Speaker Connections
Caution:
Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.
Fuse
Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse, could cause fire or damage to the unit.
If the replacement fuse fails, contact your nearest authorized Panasonic Service Center.
Maintenance
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine exterior
cleaning. Never use benzine, thinner, or other solvents.
L
R
-
-
- -
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
L
R
L
R
L
R
<Right>
<Wrong>
(White)
(White
w/black stripe)
Chassis
(Gray
w/black stripe)
(Gray)
Chassis
¡
Use ungrounded speaker only.
¡ The maximum speaker output should be 45 W or more. (If used with
the optional power amplifier, the speaker output should be higher than
the maximum amplifier output.)
¡
The speaker impedance should be 4 - 8
Ω
.
¡ This unit uses the BTCL circuit, so each speaker should be connected
separately using parallel vinyl insulated cords.
¡ The speaker cords and the power amplifier unit should be kept away
(about 30 cm apart) from the antenna and antenna extension cord.
¡ Never connect the speaker cord to
the body of the car. ¡ Do not use a 3-wire type speaker
system having a common earth
lead. ¡ Do not connect more than one
speaker to one set of speaker
leads.
MW Radio
LW Radio
CD Player
FM Stereo Radio General
Power Supply : DC 12 V (11 V - 16 V), Test
Voltage 14.4 V, Negative
Ground
Tone Controls : Bass;
±12 dB at 100 Hz
Treble;
±12 dB at 10 kHz
Current Consumption : Less than 2.5 A (CD mode,
0.5 W 4-Speaker)
Maximum Power Output : 45 W x 4 (at 4
Ω
)
Power Output : 20 W x 4
(DIN45 324, at 4
Ω
)
Speaker Impedance : 4 - 8
Ω
Dimensions (Main Unit) : 178(W) x 50(H) x
150(D) mm
Weight (Main Unit) : 1.5 k
g
Frequency Range : 87.5 - 108 MHz
Usable Sensitivity : 6 dB/µV(S/N 30 dB)
Stereo Separation : 35 dB (at 1 kHz)
Frequency Range : 531 - 1,602 kHz
Usable Sensitivity : 28 dB/µV (S/N 20 dB)
Frequency Range : 153 - 279 kHz
Usable Sensitivity : 32 dB/µV (S/N 20 dB)
Sampling Frequency : 8 times oversampling
DA Converter : 1 bit DAC System
Error Correction System : Panasonic Super Decoding
Algorithm
Pick-Up Type : 3-beam
Light Source : Semiconductor laser
Wavelength : 780 nm
Frequency Response : 20 Hz - 20 kHz (±1 dB)
Signal to Noise Ratio : 96 dB
Total Harmonic Distortion : 0.01 % (1 kHz)
Wow and Flutter : Below measurable limits
Channel Separation : 75 dB