CQ-DX100W
5
English
Wiring
Connecting the speakers
¡
Use ungrounded speakers only.
Allowable input: 50 W or more
Impedance: 4 – 8
Ω
¡
Distance between speaker and amplifier: 30 cm or
more
¡
Do not use a 3-wire type speaker system having a
common earth lead.
Caution
¡
Do not connect more than one speaker to one
set of speaker leads. (except for connecting to
a tweeter)
Before Wiring
Connecting the parking brake connection lead
–
+
PARKING BRAKE
The parking brake switch position varies with the car
model.
For details on the exact location of the parking brake
switch in your car, contact your dealer.
q
Attach a clip connector
i
to the end of the parking
brake connection lead.
w
The clip connector
i
is connected to the power
source side lead of the parking brake.
Hand brake
Foot brake
Parking Brake Lead
(Blue/yellow stripe)
When the parking brake lever is engaged,
the unit is grounded by the chassis.
Parking brake
switch
Car chassis
Battery
Brake light
Clip connector
i
Parking brake lead
(Blue/yellow stripe)
Power source side lead
Caution
¡
For safety, be sure to ask your nearest professional installer to do this connection.
When connecting this unit to the rear monitor:
¡
The parking brake lead and grand lead should be connected to the same terminal.
DX100W̲II̲01̲eng.qxd 07.11.22 6:36 PM ページ5