Panasonic CQ-D7400W Operating Instructions Manual Download Page 49

Page: 49 / 72

CQ-D7400W

Setting

Finish the
Setting.

: No sound

MUTE

: Decrease the volume by

20 dB. (attenuation)

ATT

: Does not change the volume.

OFF

: Decreases the volume to “0” (silence).

: Decreases the volume by

20 dB.

: Decreases the volume by

10 dB.

: Operation sound is ON.

: Operation sound is OFF.

OFF

CAR DVD PLAYER / RECEIVER

DISP(Display)

SEL(Select)

SET

SEL
(Select)

RET
[RETURN]

This book refers to the
connection to the
Panasonic car navigation
system that will come on
the market in future.
Descriptions regarding
the car navigation
system are boxed with
dotted line.

Normally this is set to LOW. Set this to HIGH when the level of
external input is high (when the sound is distorted or the “OVER”
display appears).

Note:

Press

[DISP]

on the main

unit or

[RET]

on the remote

control unit to return to the
regular mode.

Note:

≥

If no operation takes place for
more than 60 seconds in the
settings, the display returns to
the regular mode.

Summary of Contents for CQ-D7400W









































































Search results

Summary of Contents for CQ-D7400W

Reviews:

Related manuals for CQ-D7400W

Brands by name

Popular brands

Panasonic CQ-D7400W, Operating Instructions Manual

Search results

Summary of Contents for CQ-D7400W

Reviews:

Related manuals for CQ-D7400W

Brands by name

Popular brands