31
1
E
N
G
L
I
S
H
CQ-D5501W
30
Turn
[VOLUME]
.
q
: Up
w
: Down
Turn
[VOLUME]
.
q
: Up
w
: Down
Note:
¡
You cannot save
any SQ presetting
value in
[1]
button.
¡
Any SQ adjust-
ments will not
change the call up
screen names such
as ROCK and JAZZ.
Turn
[VOLUME]
.
q
: Up
w
: Down
30
29
E
N
G
L
I
S
H
CQ-D5501W
Audio Settings
SQ Adjustment
You can adjust the characteristics of the currently selected
sound type (SQ).
It is also possible to preset up to 5 different adjusted SQs.
Tone/SQ adjustable range: –12 dB to +12 dB (by 2 dB)
SQ Low/Bass
: ± 12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid
: ± 12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble : ± 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
¡
The bass/treble control frequency is fixed to the frequency
that has been selected for SQ.
F
To return an adjusted SQ to the default setting
q
Press
[SQ]
, and select the SQ which is to be returned to
the default setting. (Only for main unit)
w
Press and hold
[BAND]
for more than 2 seconds.
Bass/Treble
You can adjust the bass and treble sounds.
Default: BAS (bass) 0 dB
TRE (treble) 0 dB
Setting range: –12 dB to +12 dB (by 2 dB)
Press
[VOLUME] (PUSH SEL)
.
Press
[VOLUME] (PUSH SEL)
.
Press
[VOLUME] (PUSH SEL)
.
The SQ adjustment mode can be
established also by pressing
[SQ]
for more than 2 seconds.
CQ-D5501W
Volume
Default: 13
Setting range: 0 to 40
Press
[VOLUME] (PUSH SEL)
to open the menu.
[DISP]
(Return to the regular mode)
Press
[VOLUME]
(PUSH SEL
: select
)
.
(Press
[SEL]
on the
remote control unit.)
Turn
[VOLUME]
. (Press
[VOL
}
]
or
[VOL
{
]
on the remote control unit.)
Note:
¡
To return to the regular mode, press
[DISP]
.
¡
If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment, 10 sec-
onds in the SQ adjustment), the display returns to the regular mode.
¡
The volume can also be adjusted directly using
[VOLUME]
on the main unit. (
a
Page 10)
¡
Please refer to page 11 for calling up a preset SQ.
VOLUME
BASS
SUBW LPF
SUBW LEV
FADER
SQ SET
Regular mode
TREBLE
BALANCE
[SQ]
(Sound Quality)
q
Press
[
[
]
or
[
]
]
to select a frequency
band (Low, Mid, High).
[
[
]
: Higher frequency band
[
]
]
: Lower frequency band
Turn
[VOLUME]
to select a frequency.
q
: Higher frequency
w
: Lower frequency
w
Press
[
}
]
or
[
{
]
to adjust the level.
[
}
]
: Up
[
{
]
: Down
e
Press and hold one of the preset buttons
from
[2]
to
[6]
for more than 2 seconds.
¡
The adjusted SQ is preset in the num-
ber of the selected button, and return
to the regular mode resumes.
¡
When you suspend the SQ preset adjustment, each level remains your recent
adjustment until a new SQ presetting operation is performed or you call up
the SQ preset.
[
[
] / [
]
]
[
{
] / [
}
]
[BAND]
Preset Buttons [2] to [6]
(Page 32)
Level
The selected frequency band
blinks.
Frequency
