60
59
E
N
G
L
I
S
H
CQ-D1703N
Troubleshooting
(continued)
■
DVD/VCD
The disc is still unfinalized.
a
Finalize the disc.
Refer to “Discs that can be Played Back” (
a
Page 8) or “Notes on
Discs” (
a
Page 47) for other cases.
A DVD-R or DVD-RW is
not playable.
If audio or subtitles in that language are not recorded on the disc, the audio or
subtitles do not switch to that language. (Some discs permit switching
through a menu screen.)
a
Refer to the guide provided with your disc.
The audio/subtitle lan-
guage selected in the
user settings is not
used.
It is not possible to switch if the disc does not have multiple audio lan-
guages/subtitle languages/angles recorded on it.
a
Refer to the guide provided with your disc.
a
Some discs permit switching through a menu screen.
a
Sometimes, switching angle is possible only with certain scenes.
Cannot switch the
audio language/subti-
tle language/angle.
a
Set “D.Range Compression” to “Minimum”.
It is difficult to hear small
sounds. (Dolby Digital
DVD software only)
Subtitle must be recorded on the disc, or they will not appear.
a
Refer to the guide provided with your disc.
No subtitles appear.
a
A certain amount of distortion is normal.
The picture becomes
distorted while fast for-
warding or reversing.
a
Video CD menu playback works only when playing a video CD that has
the playback control feature.
Video CD menu play-
back does not work.
The video signal setting of this unit (NTSC/PAL) does not match with the
video signal setting of the connected monitor.
a
Make the same setting between this unit and the monitor.
The picture appears
incorrectly.
Cables are not correctly connected.
a
Connect cables correctly.
a
Stop the car and apply the parking brake.
The picture does not
appear on the monitor.
The microcontroller in the unit operates abnormally due to noise or other fac-
tors.
a
Unplug the power cord and plug it again.
In case the unit is still out of
order, consult your dealer.
Disc unejectable
The unit is not sufficiently secured.
a
Secure the unit to the console box.
The unit is tilted at over 30˚ in the front-to-end direction.
a
Make the angle 30˚ or less.
Sound skipping due to
vibration
There is a flaw or foreign objects on the disc.
a
Remove the foreign objects, or use a flawless disc.
Sound skipping or
noise
There is a flaw or foreign objects on the disc.
a
Remove the foreign objects, or use a flawless disc.
The disc has unplayable formatted data.
a
Refer to the description about available disc types.
No playback or disc
ejected
Problem
Possible cause
a
Possible solution
Note:
¡
Refer to “Discs that can be Played Back”. (
a
Page 8)
