CQ-C3355N
10
CQ-C3355N
11
English
General
General
This chapter explains how to turn on or off the power, how to adjust the volume, etc.
Power on
Press
[PWR]
(Power).
Power off
Hold down
[PWR]
(Power) for 1 sec. or
more.
You can remove the face plate to
prevent it from being stolen.
Removing
1
Turn off the power. (
above)
2
Press
[OPEN]
. The face plate will be
opened.
3
Push the face plate to
the left.
4
Pull it out toward you.
5
Put the face plate in
the case.
Cautions
• This face plate is not waterproof. Do not expose it to
water or excessive moisture.
• Do not remove the face plate while driving your car.
• Do not place the face plate on the dashboard or
nearby areas where the temperature rises to high.
• Do not touch the contacts on the face plate or on
the main unit, since this may result in poor electrical
contacts.
• If dirt or other foreign substances get on the
contacts, wipe them off with clean and dry cloth.
• To avoid damaging the face plate, do not push it
down or place objects on it while it is open.
Power On/off
(PWR: Power)
Face Plate Removing/Mounting
(Anti-Theft System)
Display Change
(DISP: Display)
The display changes as follows every time
[DISP]
is
pressed. (ACC ON)
At power-off:
Clock display (Default)
Display off
Mounting
1
Fit the face plate with its left hole on the
left pin provided on the main unit.
2
Fit the other hole on the other pin
applying slight pressure.
At power-on:
When the power is set to ON, refer to the description for
each source mode.
Volume off (down)
Press
[MUTE]
.
Cancel
Press
[MUTE]
again.
Note:
You can select mute or attenuation. (
page 29)
Up
Down
Setting Range: 0 to 40
Default: 18
Note:
The volume level can be set independently for
each source. (For radio, one volume setting for AM
(LW/MW), one volume setting for all FMs)
V
olume
Adjustment
(VOLUME)
Temporar
y V
olume Off
(Down)
MUTE (A
TT
: Attenuation)
Note:
For information about connectable devices,
refer to the
System Upgrade Guidebook
or the
instruction manual for each device.
The source changes as follows every time
[SOURCE]
is pressed.
USB
(Universal Serial Bus)
Connector
When the USB memory is connected to the USB
connector via a USB extension cable, the MP3/WMA
fi les stored on the device are played.
Radio
FM1, FM2, FM3, AM (
page 12)
Player
When loading CD (
page 18)
When loading MP3/WMA disc (
page 20)
AUX1
Device connected to the AUX1 terminal of this unit
When an optional device is connected:
Shift to connected device
When connecting CD changer
When connecting iPod
OR
When an expansion module is connected:
The devices connected to the ports 1 to 4 are
activated in sequence after shifting to AUX2 (device
connected to the AUX terminal of the expansion
module).
System-up Connector
Source Selection
(SOURCE)
USB Connector
When an optional USB memory is connected:
When loading MP3/WMA data (
page 24)
When an optional USB memory is not
connected:
