175
Please refer to the following sheet for detailed information.
Parameter Function
Function
Select the corresponding dome protocol.
Default setup is console.
Baud Rate
Select the baud rate.
Default setup is 115200.
Data Bit
The value ranges from 5 to 8.
Default setup is 8.
Stop bit
There are three options: 1 / 1.5 / 2.
Default setup is 1.
Parity
There are five options: none/odd/even/mark/space.
Default setup is none.
5.8.5.4 PTZ
The PTZ interface is shown as in Figure
Before setup, please check the following connections are right:
PTZ and decoder connection is right. Decoder address setup is right.
Decoder A (B) line connects with DVR A (B) line.
Click Save button after you complete setup, you can go back to the monitor interface to
control speed dome.
Figure
5-74
Please refer to the following sheet for detailed information.
Parameter Function
Channel
Select speed dome connected channel.
Control
mode
You can select control mode from the dropdown list. There are two
options: Serial/HDCVI. For HDCVI series product, please select HDCVI.
The control signal is sent to the PTZ via the coaxial cable. For the serial
mode, the control signal is sent to the PTZ via the RS485 port.
Summary of Contents for CJ-HDR216
