19
Get
ting St
arted
U
seful In
formati
on
Troubleshooting
Appendix
14
Select the [Exit] menu and then select [Save Current Values], then press
Enter
.
At the confirmation message, select [Yes] and press
Enter
.
15
Turn the computer off by using the power button.
z
If additional instructions are included with the computer, be sure to read them. It may be necessary to perform
additional operations during the following procedure.
16
Perform the First-time Operation (
Î
page 11).
17
Start the Setup Utility and change the settings as necessary.
To change the drive letter of hard disk or CD/DVD drive
NOTE
z
Drive letters can be changed only when two or more partitions have been created on the hard disk drive.
z
The name of the C: drive cannot be changed.
z
Change the drive letters before installing applications.
A
Click [start] - [Control Panel] - [Performance and Maintenance] - [Administrative Tools], and double-click [Com-
puter Management].
B
Click [Disk Management] from [Storage].
C
Right-click the hard disk partition or the CD/DVD drive name, and click [Change Drive Letter and Paths...].
D
Click [Change...].
E
Click [Assign the following drive letter] and the new drive letter, and then click [OK].
At the confirmation message, click [Yes].
