background image

81

Setup Utility

(

Underlined items are the factory presets.

)

LED Brightness

• You can set the brightness of the power indicator and the CD/DVD drive indicator. ([Auto] : The 

brightness varies according to the brightness of the internal LCD. [Dimmer] : The brightness 
remains dark.)

Auto
Dimmer

Thermal Control

• Set [Extended] if you want to optimize CPU performance controls for continued operation in 

high temperatures. 

Extended
Standard

Advanced Menu

Core Multi-Processing

• When using the originally installed Windows XP, leave this set to [Enable]. Setting to [Disable] is not 

supported.

Disable
Enable

Modem

Disable
Enable

LAN

Disable
Enable

Wireless LAN

• Only for model with wireless LAN

Disable
Enable

Wireless WAN

• Only for model with wireless WAN

Disable
Enable

PC Card Slot

Disable
Enable

SD Slot

Disable
Enable

CD/DVD Drive

Disable
Enable

USB Port

Disable
Enable

Legacy USB Support

• Select whether to use the function that makes the computer recognize internal CD/DVD drive, USB 

keyboard and USB floppy disk drive ([Enable]) or not ([Disable]) before starting Windows.

• It is effective only when [USB Port] is set to [Enable].

Disable
Enable

Summary of Contents for CF-W5 series





















































































































Reviews: