10
E
Battery Charging
There are 2 ways to charge the battery.
Charge with the battery pack attached to the computer.
When you attach the computer (
steps
1
to
3
on page 8) with the AC adaptor at-
tached to the Cradle, the battery attached to the computer is automatically charged.
Charge with the battery pack attached to the Cradle.
1
Connect the AC adaptor to the Cradle. (
step
2
on page 8)
2
Remove the battery pack from the computer. (
Reference Manual
)
3
Insert the battery pack into the charging slot of the Cradle.
Charging status indicator’s operation
Charging status indicators
Orange
Green
Blinking red
Blinking orange
Not lit
Charging
Fully-charged
Battery pack or Cradle may not be working properly. Quickly
remove the battery pack and disconnect the AC adaptor, then
connect them again. If the light continues to blink red, the battery
pack or Cradle may be faulty.
Charging has been temporarily terminated as the internal
temperature of the battery pack is outside the range possible for
charging. Charging will start automatically when the temperature
is restored to within this range.
Please wait.
Battery pack is not properly inserted.
:
:
:
:
:
