5
E
Names and Functions of Parts
The port replicator allows your peripheral devices to function exactly as if they were con-
nected directly to the computer. (Refer to “Names and Functions of Parts” in the “OPERAT-
ING INSTRUCTIONS” accompanying the computer.)
CAUTION
Do not touch the expansion bus connector, pins or springs of the port replicator.
Rear
Front/Right Side
DC-IN Jack
LOCK
Keyboard Port
Mouse Port
Parallel Port
Serial Port
Display Port
USB Ports (3 ports)
LAN Port
The protective cap from the expansion bus connector
should be placed here when the port replicator is con-
nected to the computer.
(This will prevent it from getting lost.)
Expansion Bus Connector Protective Cap
(Accompanying the port replicator)
Slide the lever all
the way back to
release the com-
puter.
Lever
This connects to the expansion bus
connector on the bottom of the com-
puter.
Be sure to keep it covered with the sup-
plied protective cap when the port
replicator is not connected to the com-
puter.
Cap Holder
Expansion Bus Connector
This operates identically
to the power switch on
the computer.
Power Switch
Check whether
the connectors
are pointing up or
down.
A Kensington cable can
be connected. For more
information, read the
manual that comes with
the cable.
Security Lock
