Panasonic CF-C1 Series Reference Manual Download

Page: 26 / 216

Key Combinations

You can make two settings:

•

Fn key lock

When you press

, the key is locked (pressed-down) until you press another key. Use this when pressing difficult key

combinations.

• Pop-up icon on/off

Start up the Hotkey Settings.

Click

(Start)/

[start] - [All Programs] - [Panasonic] - [Hotkey Settings].

Make the settings.

[Use Fn key lock]

When using an

key combination

Press

once. (Locked)

Press another key. (Lock released)
When using successive

key combinations

Press

twice. (Locked)

Press another key.

Fn key remains locked until you press

again.

[Notification]

[Make sounds when Fn key is pressed]

[Show status on screen]: Displays the Fn key status on the notification area.

•

is locked.

•

is not locked.

[Disable popup]

The Pop-up icon will not be displayed.

Click [OK].

NOTE

You can have different settings for each user.

If the speakers are muted, beeps do not sound.

Hotkey Settings

Windows 7

Windows XP

Summary of Contents for CF-C1 Series

























































































































































































































Search results

Summary of Contents for CF-C1 Series

Reviews:

Related manuals for CF-C1 Series

Brands by name

Popular brands

Panasonic CF-C1 Series, Reference Manual

Search results

Summary of Contents for CF-C1 Series

Reviews:

Related manuals for CF-C1 Series

Brands by name

Popular brands