103
External Display
You can switch the output destination to an external display.
Connect the external display to the external display port (VGA) (A).
<CF-S10 Series>
You can also switch the output destination to an external HDMI display.
Connect the HDMI display to the HDMI port (B).
The following are the display modes.
Do not switch using a method other than the one explained here.
Using key function
1
Press
+
P
or
Fn
+
F3
or click (Start) - [Connect to a Projector].
Press
Fn
+
F3
.
2
Click the display mode.
You can switch the display mode by pressing key.
NOTE
Until Windows startup is completed (during Setup Utility, etc.), the simultaneous display cannot be used and pressing
Fn
+
F3
switches the display between the internal LCD and the external display.
Switching the Display Mode
Computer only
The screen is displayed only on the internal LCD.
Duplicate
The same screen is displayed on the internal LCD and the external display.
Extend
You can use the internal LCD and the external display as an extended display area.
Projector only
The screen is displayed only on the external display.
<CF-C1 Series>
<CF-S10 Series>
Windows 7
Windows XP
Windows 7