Panasonic CF-52 Series Reference Manual Download Page 68

Page: 68 / 116

Disabling/Enabling Wireless Communication

<Only for model with wireless LAN, Bluetooth, and/or wireless WAN>

There are several ways of disabling and enabling wireless communication.

The wireless switch on the front of the computer (below)

Wireless switch utility (

page 69

)

Settings in the [Advanced] menu of the Setup Utility (

page 82

)

Setting in the Wireless Connection Disable Utility (

page 70

)

Settings in the Network and Sharing Center (

page 72

)

NOTE

For further information about Wireless LAN:

page 72

For further information about Bluetooth:

page 77

For further information about Wireless WAN: Refer to the instruction manual of the wireless device.

The wireless communication can be enabled or disabled by connecting or disconnecting the LAN cable.

page 70

To disable all wireless communication

Switch to OFF.

To enable wireless communication

Switch to ON.

In the default setting, the wireless switch enables all wireless devices when it is set to ON.

NOTE

If you uninstall the Wireless Switch Utility, set the wireless switch to ON beforehand.

Do not turn on/off the switch repeatedly at too short intervals.

Do not restart, log off, or enter sleep

or hibernation immediately after turning on/off the switch.

Do not turn on/off the switch while Windows is starting up.

To use wireless communication, set the wireless devices ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enabled]
(default) in the [Advanced] menu of the Setup Utility (

page 82

When you set [Wireless Switch] to [Disabled] in the [Advanced] menu of the Setup Utility (

page 82

), the Wireless

Switch Utility icon will not appear if you click

on the notification area. All wireless equipment (wireless LAN, Blue-

tooth, wireless WAN) will remain ready irrespective of the wireless switch setting.

It may take some time to turn off wireless communication after switching the wireless switch off.

If the IEEE802.11a setting is changed in [Device Manager] (

page 75

), the display will be changed accordingly.

Windows XP: standby

The Wireless Switch

Summary of Contents for CF-52 Series





















































































































Search results

Summary of Contents for CF-52 Series

Reviews:

Related manuals for CF-52 Series

Brands by name

Popular brands

Panasonic CF-52 Series, Reference Manual

Search results

Summary of Contents for CF-52 Series

Reviews:

Related manuals for CF-52 Series

Brands by name

Popular brands