background image

76

Wireless LAN

„

To prevent theft of data or unauthorized access to the hard disk 
via a wireless LAN (below).

z

If you plan to use wireless LAN functions, we recommend that you do so only after making 
the appropriate security settings, such as for data encryption.

„

We recommend turning the wireless LAN off when it is not used 
or out of range (

Î

page 75

).

z

If you leave the wireless LAN on, the battery's operating time is shortened.

To use the wireless LAN, set the profile using the following procedure.
The settings will vary for different network environments depending on the network system 
being used. For more details, ask your system administrator or the person in charge of the 
network.

CAUTION

z

Set profiles for each user using the following procedure.

1

Double-click 

 on the taskbar.

2

Select your wireless LAN adapter and select [General].

3

Select [On] for [Switch radio].

4

Select [Networks] and select [Add].

5

Enter the profile name and network name (SSID), and then make 
other necessary changes, then select [Next].

6

Make necessary changes and select [Finish]. 

z

For security reasons, we recommend that you enable the encryption (WEP).
If you enable WEP, enable encryption on the access point side as well.

The Settings

Summary of Contents for CF-51 Series















































































































Reviews: