15
Getting Started
5 Setup
Windows.
Follow the on-screen instructions.
After turning on the computer, “Please wait a moment while windows pre-
pares to start for the
fi
rst time .........” appears, and then a small circle circu-
lates on the screen. This will take a few minutes.
During setup of Windows, use the touch pad and clicking to move the cursor
and to click an item.
Setup of Windows will take approximately 20 minutes.
Go to the next step, con
fi
rming each message on the display.
CAUTION
You cannot choose the following words for user name and password: CON,
PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.
You can change the user name, password, image and security setting after
setup of Windows.
Remember your password. If you forget the password, you cannot use the Win-
dows. Creating a password reset disk beforehand is recommended.
The wallpaper for the
fi
rst logon user has already been set on “4 Setup Win-
dows.” .
When using this computer under the Sun, the screen becomes easily viewable
by changing the wallpaper to the white wallpaper.
A
Right-click on the desktop, and click [Personalize] - [Desktop Background].
B
Select [Solid Colors] at [Picture Location].
C
Select the white wallpaper and click [OK].
When you set date/time/time zone and click [Next], the screen may not go to the
next step for a few minutes. Do not touch the keyboard or touch pad, and wait
until the screen changes.
If “An unexpected error has occurred ...” (or a similar message) is displayed,
click [OK]. This is not a malfunction.
Wait until the hard disk drive indicator has turned off.
6
<Only for model with touchscreen>
Perform the touchscreen calibration.
NOTE
At
fi
rst, log on to Windows as an administrator, and perform this calibration.
A
Click
(Start) - [Control Panel] - [Additional Options] - [Tablet Calibration].
B
Using the stylus, touch each of the 9 “+” target marks one by one.
NOTE
Perform the following calibration for each user.
A
Click
(Start) - [Control Panel] - [Mobile PC] - [Tablet PC Settings].
B
Click [Calibrate].
C
Using the stylus, touch each of the 4 “+” target marks one by one, and then
click [OK].
Perform the calibration for the orientation to be used.
A
Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen
Calibration Utility].
B
Using the stylus, touch each of the 12 “+” target marks one by one until it
blinks, and then press
Enter
.
C
Press
Enter
.
DFQW5231ZA̲CF-30mk3̲V̲XP̲M.indb 15
2008/11/10 17:52:13