background image

7

Getting Started

THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS 

PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAF-

FIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT 

COCKPIT EQUIPMENT/SYSTEMS

*1

. PANASONIC WILL 

NOT BE RESPONSIBLE FOR ANY LIABILITY RESULT-

ING FROM THE USE OF THIS PRODUCT ARISING OUT 

OF THE FOREGOING USES.

*1

  AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include 

Class2 Electrical Flight Bag (EFB) Systems and Class1 

EFB Systems when used during critical phases of 

fl

 ight 

(e.g., during take-off and landing) and/or mounted on to 

the aircraft. Class1 EFB Systems and 2 EFB Systems are 

de

fi

 ned by FAA: AC (Advisory Circular) 120-76A or JAA: 

JAA TGL (Temporary Guidance Lea

fl

 ets) No.36.

Panasonic cannot guarantee any speci

fi

 cations, technolo-

gies, reliability, safety (e.g. Flammability/Smoke/Toxic-

ity/Radio Frequency Emission, etc) requirements related 

to aviation standards that exceed the speci

fi

 cations of our 

COTS (Commercial-Off-The-Shelf) products.

39-E-1

This computer is not intended for use in medical equipment 

including life-support systems, air traf

fi

 c control systems, or 

other equipment, devices or systems that are involved with 

ensuring human life or safety. Panasonic cannot be held re-

sponsible in any way for any damages or loss resulting from 

the use of this unit in these types of equipment, devices or 

systems, etc.

The CF-30 was developed based on thorough research into 

the real-world portable computing environments. Exhaustive 

pursuit of usability and reliability under harsh conditions led 

to innovations such has the magnesium alloy exterior, vibra-

tion damped hard disk drive and 

fl

 oppy disk drive, 

fl

 exible 

internal connections. The CF-30’s outstanding engineering 

has been tested using the strict MIL-STD- 810F (for vibration 

and shock) and IP (for dust and water) based procedures.

As with any portable computer device precautions should be 

taken to avoid any damage. The following usage and han-

dling procedures are recommended. 

Before putting the computer away, be sure to wipe off any 

moisture.

If a Malfunction Occurs, Immediately Unplug the AC 

Plug and the Battery Pack

 This product is damaged

 Foreign object inside this product

 Smoke emitted

 Unusual smell emitted

 Unusually hot

Continuing to use this product while any of the above condi-

tions are present may result in 

fi

 re or electric shock.

 If a malfunction occurs, immediately turn the power off and 

unplug the AC plug, and then remove the battery pack. 

Then, contact your technical support of

fi

 ce.

Do Not Touch This Product and Cable When It Starts 

Thundering

Electric shock may result.

Do Not Connect the AC Adaptor to a Power Source 

Other Than a Standard Household AC Outlet

Otherwise, a 

fi

 re due to overheating may result. Connecting 

to a DC/AC converter (inverter) may damage the AC adap-

tor. On an airplane, only connect the AC adaptor/charger to 

an AC outlet speci

fi

 cally approved for such use.

Do Not Do Anything That May Damage the AC Cord, the 

AC Plug, or the AC Adaptor

Do not damage or modify the cord, place it near hot tools, 

bend, twist, or pull it forcefully, place heavy objects on it, or 

bundle it tightly.

Continuing to use a damaged cord may result in 

fi

 re, short 

circuit, or electric shock.

Do Not Pull or Insert the AC Plug If Your Hands Are Wet

Electric shock may result.

Clean Dust and Other Debris of the AC Plug Regularly

If dust or other debris accumulates on the plug, humidity, 

etc. may cause a defect in the insulation, which may result in 

fi

 re.

  Pull the plug, and wipe it with a dry cloth.

Pull the plug if the computer is not being used for a long 

period of time.

Insert the AC Plug Completely

If the plug is not inserted completely, 

fi

 re due to overheating 

or electric shock may result.

  Do not use a damaged plug or loose AC outlet.

Close the Connector Cover Tightly When Using the 

Computer Where Is a Lot of Water, Moisture, Steam, 

Dust, Oily Vapors, etc.

The entry of foreign matter may cause a 

fi

 re or electric 

shocks.

  If foreign matter has found its way inside, immediately turn 

the power off and unplug the AC cord, and then remove 

the battery pack. Then contact your technical support of-

fi

 ce.

Do Not Disassemble the Computer

There are high-voltage areas inside which may give you an 

electric shock if you should touch them.  Do not touch the 

pins and circuit boards inside, and do not allow foreign mat-

ter to enter inside.

Also, remodeling or disassembly may cause a 

fi

 re.

Keep SD Memory Cards Away from Infants and Small 

Children

Accidental swallowing will result in bodily injury.

In the event of accidental swallowing, see a doctor immedi-

ately.

Do Not Place the Computer on Unstable Surface

If balance is lost, the computer may fall over or drop, result-

ing in an injury.

Avoid Stacking

If balance is lost, the computer may fall over or drop, result-

ing in an injury.

Do Not Leave the Computer in High Temperature Envi-

ronment Such as in a Sun-Heated Car, for a Long Period 

of Time

Leaving the computer where it will be exposed to extremely 

high temperatures such as in a sun-heated car or in direct 

sunlight may deform the cabinet and/or cause trouble in the 

internal parts. Continued use in such a resulting condition 

may lead to short-circuiting or insulation defects, etc. which 

may in turn lead to a 

fi

 re or electric shocks.

Hold the Plug When Unplugging the AC Cord

Pulling on the cord may damage the cord, resulting in a 

fi

 re 

or electric shock.

Do Not Move the Computer While the AC Plug Is Con-

nected

The AC cord may be damaged, resulting in 

fi

 re or electric 

shock.

  If the AC cord is damaged, unplug the AC plug immedi-

ately.

Use Only the Speci

fi

 ed AC Adaptor With Your Computer

Using an AC adaptor other than the one supplied (attached 

to your computer or supplied by Panasonic) may result in a 

fi

 re.

Do Not Subject the AC Adaptor to Any Strong Impact

Using the AC adaptor after a strong impact such as being 

dropped may result in electric shock, short circuit, or 

fi

 re.

Take a Break of 10-15 Minutes Every Hour

Using the computer for long periods of time may have detri-

mental health effects on the eyes or hands.

Precautions

Summary of Contents for CF-30 Series









































Reviews: