7-24
7.2.10. Setting the HDD Main FPC
1. Fix the HDD Main FPC to the Batt HDD CN Angle using
the two Screws<a> and the two Screws<b>
2. Fix the CN Spacer to the Batt HDD CN Angle using the
Screw<Z>.
3. Fix the Batt HDD CN Angle using the Screw<Y>.
Screw <Y>: DFHE5092ZA
Screw <Z>: DFHE5025ZA
Screws <a>: DRHM5104ZA
Screws <b>: DFHE5025XA
n
Arranging the HDD Main FPC
<Y>
Battery Angle Sheet
Rib
MINI PCI
Spacer
HDD Connector
EMP Sheet Batt HDD FPC
FPC Conduction
Tape
View "A"
View "A"
<a>
<b>
<b>
<a>
Batt HDD
CN Angle
Batt HDD
CN Angle
HDD Main
FPC
CN Spacer
<Z>
Battery Connector
Insulation Sheet
Press
Set the Batt HDD CN Angle
sliding to the left so that the
HDD Main FPC does not
attach to the Rib of the Top
Cabinet.
HDD Main FPC
HDD Main FPC
HD FPC Tape
Cable Sheet
Cable Sheet
Sheet
<No good>
Sheet
White line
White line
White line
White line
White line
0~2mm
2~3mm
R0.5~1.0mm
1±1mm
1±1mm
0~1mm
0±0.5mm
Bend
90
Bend
180
Bend
180
Bend
180
Bend
90
Component side
Foil side
Attention when bending the FPC
1. Inside of bending should be from R0.5mm to R1mm.
2. Do not mistake the direction of bending.
