FUNCTIONS
PIN DESCRIPTION
RJ-45 Connector Pin Description
Pin# 1
: VCC, DC power (10V ~ 16VDC)
Pin# 2
: GND
Pin# 3
: Audio Signal
Pin# 4
: Audio Signal GND
Pin# 5
: GND
Pin# 6
: 2.8V out when the unit is on. Short this pin
to GND to remotely turn on TX.
Pin# 7
: 0V when TX is ON, 5V when TX is OFF.
Use this pin for recording trigger (Recording Trigger)
Pin# 8
: FULL UP 5V 470 OHM
8
1
1
8
- 95 Channel Possible in the 2400~2483MHz Bandwidth
- Transmission Range up to 1500 feet in open field
- Audible and LED indicator out of range warning.
- Better voice quality.
- 40 bits security code combination.
- Charger Status Indicator
- Mute function On/Off Key (Transmitter)
- Auto link (When the system On/Off is On mode)
- Recorder On/Off Switch
- Transmitter Power On/Off switch
- Low Battery Indicator (Transmitter)
- Link LED indicator (Receiver & Transmitter)
- Beep Mode and Vibration Mode Selectable for user’s convenience
TROUBLESHOOTING
Problems
Check Points
No reception
- Check the battery status
- Check the connection and cables
- Check the communication range
Poor reception,
static, noise
- Change the location of RX Set
- Check the communication range
- Check to see if unit is placed near TV,
speakers, or other electronic devices
Unit does not
respond
- Check the battery status
- Check the power switch on the bottom of
the unit
- Check the connection and cables
Normal
“
H
”
5.0V
0V
TX unit is on
0V
Recording starts
Normal
“
H
”
5.0V
