Panasonic BTLH2600W - 26" HD MONITOR, Operating Instructions Manual, Page: 30 / 38

30
REMOTE Specifications
REMOTE operation is possible on this monitor using the GPI/RS-232C terminal.
Each of the items in the GPI screen are compatible with the following terminals.
You can assign functions to each terminal in the menu GPI screen ( J page 26).
The functions assigned to each terminal operate when the GND (5 Pin) is connected (ON) or open (OFF).
g
Operating conditions
Level operation: operates when GND is connected.
Edge operation: operates when GND changes from
open to connected.
• If you have assigned a level operation function to
more than one terminal, the function operates as long
as one of the terminals is connected.
*1 When the 16:9 marker and 4:3 marker are simultaneously selected and activated on the 16:9 aspect display, both markers are displayed.
*2 When the 16:9 marker and 4:3 marker are simultaneously displayed, the background selected with the 16:9 marker is controlled.
*3 When both “R-TALLY” and “G-TALLY” are ON at the same time, the tally color becomes orange.
*4 This is only enabled when “RGB-VIDEO” is selected in “YP
B
P
R
/RGB” in the “INPUT SELECT” menu.
GPI terminal
Pin number Signal
1 GPI1
2 GPI2
GPI Terminal (9P) 3 GPI3
4 GPI4
5 GND
6 GPI5
7 GPI6
8 GPI7
9 GPI8
Assignment items Function Operating conditions
UNDEF
No settings (no terminal assignment functions) —
MARKER1
ON/OFF
*1
Switches the marker display of the marker decided in
“GPI PRESET1” ( J page 17) in the “MARKER” menu.
Level operation
(Connected: ON, Open: OFF)
MARKER2
ON/OFF
*1
Switches the marker display of the marker decided in
“GPI PRESET2” ( J page 17) in the “MARKER” menu.
Level operation
(Connected: ON, Open: OFF)
MARKER
BACK HALF
*2
Reduces the brightness of the background outside the
marker displayed in “GPI PRESET1” ( J page 17) by 50%.
Level operation
(Connected: ON, Open: OFF)
MARKER
BACK BLACK
*2
Reduces the brightness of the background outside the
marker displayed in “GPI PRESET1” ( J page 17) to 0%.
Level operation
(Connected: ON, Open: OFF)
CENTER MARKER
Switches the center marker display ON/OFF.
(When other markers are being displayed, this is
superimposed on the other markers)
Level operation
(Connected: ON, Open: OFF)
INPUT SEL. VIDEO
Switches the input system to VIDEO. Edge operation
INPUT SEL. Y/C
Switches the input system to Y/C. Edge operation
INPUT SEL. SDI1
Switches the input system to SDI1. Edge operation
INPUT SEL. SDI2
Switches the input system to SDI2. Edge operation
INPUT SEL.
YP
B
P
R
/RGB
Switches the input system to YP
B
P
R
/RGB. Edge operation
SD ASPECT
Sets the aspect ratio settings when using SD signal
input. (Disabled when using HD signal and PC signal)
Level operation
(Connected: 16:9, Open: 4:3)
SCAN
You can switch the scan mode between “UNDER”
and “NORMAL”. (Disabled when using PC signal)
Level operation (Connected: UNDER,
Open: NORMAL)
R-TALLY
*3
Lights the red tally. Level operation
(Connected: ON, Open: OFF)
G-TALLY
*3
Lights the green tally. Level operation
(Connected: ON, Open: OFF)
MONO
Switches between color and monochrome
(MONO). (Disabled when using PC signal)
Level operation (Connected:
Monochrome, Open: Color)
GAMMA SEL. FILM
Used to switch the gamma characteristic to the
FILM mode.
Level operation (Connected: FILM
mode, Open: STANDARD mode)
GAMMA SEL.
STDIO/PST
Used to switch the gamma characteristic to the
STDIO/PST mode.
Level operation (Connected: STDIO/
PST mode, Open: STANDARD mode)
RGB SYNC
*4
Used to select SYNC at the time of RGB-VIDEO
input.
Level operation
(Connected: EXT, Open: G-ON)