Panasonic BT-S1315DA, Service Manual

Page: 64 / 149

file:///E:/BT-S1315DA_BT-S1315DAD_BT-S1415DA_BT-S1415DAD/SVC/s0413040000.html
4.13.4 6500K Adjustment
TOP PREVIOUS NEXT
1. Set the monitor to the FACTORY mode and then COLOR TEMP on the menu to 6500K.
2. Adjust the input signal to obtain a brightness of Y=5 nit±1.5 nit.
3. Adjust R-BIAS and B-BIAS to obtain a color temperature of x=313±3 and y=329±3.
4. Adjust the input signal to obtain a brightness of Y=250 nit±20 nit.
5. Adjust R-GAIN and B-GAIN to obtain a color temperature of x=313±3 and y=329±3.
6. Repeat steps 2 through 5 until the color temperature becomes the specified values under the
above both conditions, and complete this adjustment in step 3.
•@
TOP PREVIOUS NEXT
file:///E:/BT-S1315DA_BT-S1315DAD_BT-S1415DA_BT-S1415DAD/SVC/s0413040000.html [2006-02-04 08:28:51]