Panasonic BT-LH1770P, Operating Instructions Manual

Page: 78 / 80

- 69 -
■
Additional user-set functions
Pin No. Function External Assignment for Function
User setting SHADOW0 on
Connect to Pin 1 for running with the shadow level 0% (black).
* Priority is given to this pin function if any other shadow setting pin is pressed at
once.
User setting SHADOW20 on Connect to Pin 1 for running with the shadow level 20%.
User setting SHADOW40 on Connect to Pin 1 for running with the shadow level 40%.
User setting SHADOW60 on Connect to Pin 1 for running with the shadow level 60%.
User setting CH-C on
Connect to Pin 1 to select C channel in the SDI input mode.
Pin 15 is also connected to Pin 1.
* When CH-C is OPEN, the A channel will be selected.
User setting CH-D on
Connect to Pin 1 to select D channel in the SDI input mode.
Pin 15 is also connected to Pin 1.
* When CH-D is OPEN, the A channel will be selected.
User setting HDMI on
Connect to Pin 1 to select the HDMI input mode.
* When HDMI and SDI are open, the analog composite will be selected.
User setting PinP on Connect to Pin 1 to set PinP to on.
User setting U.MRK SCENE01 Connect to Pin 1 to set USER MARKER (SCENE01) to on.
User setting U.MRK SCENE02 Connect to Pin 1 to set USER MARKER (SCENE02) to on.
User setting U.MRK SCENE03 Connect to Pin 1 to set USER MARKER (SCENE03) to on.
User setting U.MRK SCENE04 Connect to Pin 1 to set USER MARKER (SCENE04) to on.
User setting U.MRK SCENE05 Connect to Pin 1 to set USER MARKER (SCENE05) to on.
User setting U.MRK SCENE06 Connect to Pin 1 to set USER MARKER (SCENE06) to on.
User setting U.MRK SCENE07 Connect to Pin 1 to set USER MARKER (SCENE07) to on.
User setting U.MRK SCENE08 Connect to Pin 1 to set USER MARKER (SCENE08) to on.
User setting U.MRK SCENE09 Connect to Pin 1 to set USER MARKER (SCENE09) to on.
User setting U.MRK SCENE10 Connect to Pin 1 to set USER MARKER (SCENE10) to on.
* The functions of pins other than 1 are freely user-settable on MENU.
* When SCENE 01 ~ 10 of USER MARKER is set with multiple pins, lower numbers are given priority.
For example, when both SCENE 01 and SCENE 03 are ON, SCENE 01 takes precedence
Data3 RS-485 Pin Function
* For the connection between the monitor, use straight LAN cable.
＜
Female terminal
＞
Pin No. IN terminal OUT terminal
１ TXD ＋ TXD ＋
2 TXD
－
TXD
－
3 RXD
＋
RXD
＋
4 GND GND
5 GND GND
6 RXD
－
RXD
－
7 NC NC
8 NC NC
1
2
3
4
5
6
7
8