Panasonic BL-PA300KTA - High Definition Power Line Communication Ethernet Adaptor..., Operating Instructions Manual

Page: 16 / 64

16
Installation
Connecting adaptors to network devices
Once you have placed the adaptors where you plan to use them and are
satisfied with the network speed test results for your terminals (see
page 17), follow the procedure below to connect your adaptors to your
network devices (broadband router, hub, computer, network printer, network
camera, etc.). This will integrate your HD-PLC network with your home
network.
1.
Confirm that each adaptor is plugged in correctly to the wall outlet.
• Do not plug adaptors in upside-down (i.e., with the LAN jack
facing up).
2.
Connect a LAN cable to each adaptor’s LAN jack.
• The LAN indicator of each adaptor turns green.
• If an adaptor’s LAN indicator does not turn green, see page 23.
3.
Connect the other end of each LAN cable to a network device.
• Up to 16 adaptors can be connected to the same network. If a
hub is used, up to 8 devices can be connected to each adaptor.
• Avoid connecting more than one adaptor to the same hub or
router.
• Refer to the illustration on page 11 for an example of an
integrated HD-PLC network.
You are now ready to use your computers, network printers, network
cameras, etc.
BL-PA300KTA_OI.book Page 16 Wednesday, August 6, 2008 10:08 AM