Operating Instructions
36
Notes
•
Some wireless devices do not support the WEP 152 bit.
•
The camera supports only the open system authentication. If the router or
access point is set to shared key authentication, set it to auto or open
system.
4.
Click [Save] when finished.
•
New settings are saved.
•
When finished, "Success!" is displayed.
5.
Click [Go to Wireless configuration page].
•
The Wireless page is displayed.
6.
Set the switch to WIRELESS.
Notes
•
It takes about 1 minute for the new settings to be effective.
•
It is not possible to access the camera simultaneously by both wired and
wireless connection.
•
To communicate using wireless connection, set up the camera by using
wired connection and set the switch from wired to wireless as shown
below.
•
When you switch wired to wireless or vice versa, restart the camera. Some
routers also may need to be restarted after switching.
WIRED
WIRELESS
Switch
< Bottom >
Summary of Contents for BL-C30A - Wireless 802.11 b/g Network Camera
Page 111: ...Operating Instructions 111 Index ...