Panasonic BL-C30 Operating Instructions Manual Download Page 80

Page: 80 / 118

Operating Instructions

2.16 Changing Indicator Display

The Indicator Control page allows you to select Indicator operation. Indicator has
four options.
•

Always on

•

Turn the indicator on when the camera is accessed.

•

Turn the indicator on during sensor reaction.

•

Always off

Click [Indicator Control] on the Setup page.

Select indicator option.

•

Clicking [Cancel] cancels your settings without saving changes.

Notes

•

See page 8 in the Installation/Troubleshooting for indicator display.

•

Selecting [Never turn indicator on] keeps indicator always off.

Click [Save] when finished.

•

New settings are saved.

•

When finished, "Success!" is displayed.

Click [Go to Indicator Control page].

•

The Indicator Control page is displayed.

Summary of Contents for BL-C30























































































































Search results

Summary of Contents for BL-C30

Reviews:

Brands by name

Popular brands

Panasonic BL-C30, Operating Instructions Manual

Search results

Summary of Contents for BL-C30

Reviews:

Brands by name

Popular brands