10.5 Allowing IPv6 Access from the Internet
You can configure the camera to allow or restrict IPv6 access from the Internet.
1.
Click the [Internet] tab.
2.
Under [Allow Access from the Internet (IPv6)], select [Yes] to allow IPv6 access to the camera from the
Internet, or [No] to limit IPv6 access to the camera.
•
If [No] is selected, IPv6 access to the camera is only possible from an address of the same prefix as
the camera’s IPv6 address. The camera will not be able to be accessed from the Internet using IPv6.
3.
Click [Save].
194
Operating Instructions
10.5 Allowing IPv6 Access from the Internet
Summary of Contents for BL-C210 Series
Page 124: ...6 After the wizard is displayed click Next 124 Operating Instructions 5 2 HTTPS Settings ...
Page 126: ...9 Click Next 126 Operating Instructions 5 2 HTTPS Settings ...
Page 127: ...10 Click Finish Operating Instructions 127 5 2 HTTPS Settings ...
Page 131: ...6 Click Finish 7 Click Yes Operating Instructions 131 5 2 HTTPS Settings ...
