Install
You want to connect the network equipment
By installing the adapter, and after confirming the communication speed (+ 13 Page), network equipment
(parts
Load band router, switching hub, computer, network cameras, net
Please connect and work printers).
Check the connection of the power cord (
,
)
●
The power cord of each adapter adapter, power plug power cord
Please make sure that you are connected to the outlet.
LAN We want to connect the adapter and network equipment in the cable
( , )
●
The parent machine router or line terminating equipment /
VDSL It's going to connect the modem
Sai.
●
The handset is connected to network equipment such as personal computers and network camera
Please be.
Base unit
Cordless
handset
Router or line termination
Equipment /VDSLTo modem
Connection
Switching hub, PC,
Network camera, such as
Connection to the network equipment
●
When the connection of the adapter and network equipment is complete, the lamp is as follows:
Lights. If the lighting or not blinking, before the separate "use / troubled
And "About the lamp display" of "when the (+11 Please refer to the page).
PLC
LAN
MASTER
(Green lights)
(Green lit or
Green Flashing)
(Green lights)
PLC
LAN
MASTER
(Green lights)
(Green lit or
Green Flashing)
(Extinction)
Base unit
●
Cordless
handset
14
If the power of the network equipment used does not contain theLAN Lamp ( LAN)
It will lit orange.
●
Do not connect more than one adapter to the same router or switching hub to Do
There. There is the communication speed of the network is extremely slow.
●
Adapter and other network equipment IP When the address appears to be a conflict
It is, of adapter IP Please change the address. (+22 Page)
●
Example of the configuration of the network Seven Please refer to the page.