BB-HNP17
(Server)
Router
Router
Network camera
Web browser
(Client)
Internet
This system is designed to
enlarge the image
(stationary image) at the
time of the sensor
detection by popping it out
on the screen for notifying
purpose.
Routine-run
Even if a user of this system uses his/her PC at any place distant from a site to be
recorded, this system enables the user to record and replay, on his/her PC, any
image with sound which can be taken through its network camera connected with
LAN or the Internet.
Under this system, the user can record any image as well as sound with it, and so
the user can feel as if he/she was on the spot, even though he/she is actually away
from the site. Also, this system enables the user to record several pieces of images
through its network cameras at the same time.
Corresponding to the existing convenient functions of MPEG-4 and Motion JPEG,
this system has also newly corresponded to the H.264 function which is responsible
for high-compression and smooth moving image. So, users of this system can
select a proper recording mode among multiple choices according to recording
uses and environments.
Internet
H.264
MPEG-4
JPEG
H.264
MPEG-4
JPEG
This system enables a user to record and monitor, innovatively clearly in such high
resolution as 1280 x 960 pixels, any image taken through its camera.
If you need to take a clear and detailed image for your convenient use by this
system, you can save in your PC your recorded data as high image quality as it is
for your convenience.
H.264, MPEG-4 and Motion JPEG Recording & Monitoring
Supports Resolution of 1280 x 960
This function shows different multi-monitoring images at certain intervals and can
switch into different pages of those images.
Auto Scan Display under Multi-Monitoring
Remote Access Function
If a user gets [BB-HNP17] installed on his / her PC, the user can access and / or
check any image taken by the network camera on the web browser of his / her PC
through the Network. In this use, [BB-HNP17] doesn't need to be installed on the
PC on the client's side. Users making access to the image can establish three
stages of access rights. The administrator has the right to create new use
environmental settings by, for example, adding new recording conditions, etc.
Flexible Layout
Full Screen Display
Single Monitoring Screen Display
Flexibility of Layout Setup
Pop-up Display with Sensor Detection
Motion Detection Recording
Recording starts when any
movement in the image of the
entrance or other place is
sensed.
Network Camera Recorder
with Viewer Software
Internet
Sound Detection Recording
Recording starts the moment a
big sound happens in the place;
the sound of collapse of things
in a warehouse, etc.
Network Camera Recorder
with Viewer Software
Internet
Shock Detection Recording
Recording starts the moment the
system detects any shocks on the
camera; someone is trying to
damage the camera or something
hits the camera, etc.
Network Camera Recorder
with Viewer Software
Internet
Timer Recording
Recording the inside of your
shop or other places at
intervals
Network Camera Recorder
with Viewer Software
Internet
*Only Alarm 1 is available in case
of BB-HCM705/HCM701
Alarm Recording
Recording starts when any
movement of the door or
other items is sensed.
Network Camera Recorder
with Viewer Software
Internet
Door sensor
( Alarm 1 )
Door sensor
( Alarm 1 )
Under this function, different types of sensors (Movement Detector, Shock
Detector, Sound Detector, External Sensor Detection) are designed to start
recording. Also this system has its timer recording function which starts and
ends the recording at user's specified time. Besides, in case of Timer
Recording, the direction of the monitoring lens is designed to set at the
specified target when the recording starts. Any combination of recording
functions is available. For example, Sensor Detection Function combined with
Timer Recording Function is possible. Recording to be started by Movement
Detector within the specified time frame and Alarm Recording are also possible.
Also, Recording Time before and after the sensor detection can be specified for
setting. Timer Recording Function is designed to set 10 times of recording per
camera. This enables a user to change recording-start /-end times between
weekdays and weekend for his/her convenience.
Multi-Sensor-Activated Recording/
Timer Recording with Preset Position
Original file format: Images and voices are recorded continuously in a
moving image file.
Recording file format
Hard disk, network drive*
2
Recording media
H.264 : 1280 x 960 / 640 x 480 / 320 x 240
MPEG-4 : 1280 x 960 / 640 x 480 / 320 x 240 / 192 x 144
MotionJPEG : 1280 x 1024 / 1280 x 960 / 640 x 480 / 320 x 240 /
192 x 144 / 160 x 120
Recording resolution*
1
Favor clarity , Standard , Favor motions
Image quality (JPEG only)
Not specified (based on camera's image update interval),
specified: 5 images/second to 1 image/hour Recording interval designation
and sound recording can be done simultaneously.
Recording interval
Dependent on camera type and performance of PC.
See the hardware specifications "System Requirements for your PC".
No. of camera units for
simultaneous recording
Maximum recording capacity value can be set for individual camera units
(Whether to save new data by overwriting or to stop recording when
the set capacity is reached can be selected). In addition to a capacity limit
for each camera, there is also a capacity limit for the entire storage media.
Recording capacity
limit function
The unit can be set to activate recording when motion is detected (sensitivity
and threshold value can be adjusted) or to record for a certain time length
before and after motion detection.*
3
Motion detection can be disabled in
specified areas. Motion detection can be confirmed on-screen.
Motion detection recording
(JPEG only)
Starts recording with shock detection recording when the camera detects a shock.
The recording time for shock detection recording (and so on) is set using this software.
Shock detection recording*
1
(JPEG only)
The unit can be set to activate recording when sound is detected
(Loudness and threshold value can be adjusted) or to record for a certain
time length before and after motion detection.
Sound detection can be confirmed on-screen.
Sound detection recording*
1
(JPEG only)
Scheduled start and stop timer based on day of week and time.
Key word can also be set for recording.
(10 schedules can be registered per camera).
Timer recording
Specifying the display location of timer start/stop times
Timer recording with
preset position
Recording is triggered by the reaction of a sensor mounted to the camera.
A certain time length before and after the sensor
reaction can also be recorded.
Alarm recording (JPEG only)
Monitors the free space on the specified recording disk,
and stops recording when the free space becomes smaller
than the set value.
Disk capacity limit function
Camera registration monitoring
Specifications
Recording
Image operation
Image search
Color night view activation/deactivation can be
registered in a schedule
Time specified color night view*
1
Periodically scans and displays the locations registered
in the camera presets.
(Only for cameras with preset sequence feature)
Preset Sequence*
1
Preset functions set in cameras can be used
Preset
Control of basic camera functions (pan/tilt/zoom,
brightness, resolution, image quality, sound level)
Camera control*
1
3 types of zoom functions: the camera zoom functions
(Ex zoom and digital zoom), as well as
the ActiveX control of the computer.
Image zoom in/out*
1
Automatically adjusted to match the camera layout.
Selected camera image display
Each camera can be set up individually
(camera name, resolution, image quality setting,
recording format, timer setting, etc.)
Camera setup*
1
Automatically adjusted to match the camera layout.
Image display size
Sequential display, Up to 16 multi-camera display,
full screen display, layout change
Camera image view
Up to 64 camera units.
Note that the actual number of registerable camera units
varies depending on the performance of the PC used.
No. of registerable
camera units
Playback of images with voices, playback of image files. Playback speed
can be varied. Playback in reverse is possible. Simultaneous playback of
images from multiple cameras is also possible.
Continuous play back
Language
BB-HNP17A (For USA): English / Japanese
BB-HNP17CE (For Other Regions): English / Germany / Spanish / Italian
A list of recorded image files, or a graphical list can also be displayed.
Recorded image view
Recorded images can be copied or deleted.
Operation of
recorded images
All or part of the recorded images can be converted to MPEG-1, MPEG-4,
or JPEG format files, or only the audio portion can be converted to WAV files.
Format conversion
Search recorded images in 1-day units using the recording time, or
using a key word set before recording.
Searching can also be done for particular, desired folders.
Recorded image
search function
*1 Depends on Camera's Spec.
*2-1 Folders on the network allotted to the drive can be specified for saving data.
*2-2 When a network drive is specified as a folder for saving data, the amount of data flowing
over the network increases.
This may remarkably degrade the operating performance for watching or recording camera
images, watching previously recorded images, etc., and may also result in errors. It is
recommended that a folder on a local disk be specified for saving data.
*3 The detection level varies depending on the camera resolution, image quality setting, subject
conditions, network conditions, etc.
Cautions: Before you install the remote
client of [BB-HNP17], please be sure to
buy the following license fro use.
For USA: BB-HCA5A and BB-HCA8A
For Other Regions: BB-HCA5CE and BB-HCA8CE
* Corresponding Model Types
Network Cameras
[H.264]
BB-HCM735 /HCM715 /HCM705 /HCM701
BL-C230 /C210
[MPEG-4]
BB-HCM735 /HCM715 /HCM705 /HCM701 /HCM581
/HCM580 /HCM547 /HCM531 /HCM527 /HCM515 /HCM511
BL-C230 /C210 /C160 /C140 /C131 /C111 /C121/C101
[Motion JPEG]
BB-HCM735 /HCM715 /HCM705 /HCM701 /HCM581 /HCM580
/HCM547 /HCM531 /HCM527 /HCM515 /HCM511/
BB-HCM403 /HCM371A /KX-HCM110A
BL-C230 /C210 /C160 /C140 /C131 /C111 /C121 /C101 /C1
This system enables a user to display images from up to 16 network cameras on
one screen for simultaneous monitoring (Multi-Monitoring). In case that the
number of network cameras registered in [BB-HNP17] exceeds 16 units, this
system can show images from up to 64 network cameras on 128 pages of
screens and switch these screens flexibly according to the user's need. Under
this system, for example, a user can switch images from its cameras into a Full
Screen Display or switch into a single screen display (Single Monitoring Screen
Display) by double-clicking a image the user want to check closely, etc.
If you double-click an image from the network camera, the screen display on your
PC is switched into Single Monitoring / Multi-Monitoring screen for the user’s
convenience.
Under this function, you can set up the layout of multi image screen display. For
example, you can enlarge an image you want to check closely, you can change the
number of images vertically and horizontally for your convenience, etc
A camera image is displayed on the full screen of your PC.
1 / 3 Pages of images
through 4 different
cameras are displayed for 5 sec.
2 / 3 Pages of images
through 4 different
cameras are displayed for 5 sec.
3 / 3 Pages of images
through 4 different
cameras are displayed for 5 sec.
Camera1 Camera2
Camera3 Camera4
Camera5 Camera6
Camera7 Camera8
Camera9 Camera10
Camera11 Camera12
Routine-run
Routine-run
Feel Safer with Panasonic
Feel Safer with Panasonic
Clear image and innovative sound recording functions
provide excellent monitoring for your business
Color Night View Mode OFF
In case of Normal Mode
in the night
Color Night View Mode ON
Timer Setting
automatically
switches image
modes.
Time Specified Color Night View
This function is for setting the timer to turn ON/OFF the Color Night View Mode.
This function automatically turns on Normal Mode in daytime and turns on Color Night
View Mode in the night or a dark situation, and so this function enables recording /
monitoring images taken by the Network camera(s) in a proper mode according the
recording situation. This function also memorizes the shutter speed of the normal
mode and so recovers the shutter speed of Color Night View Mode into the one of
Normal Mode when
switching from
Color Night View
Mode into Normal
Mode.
