![background image](http://html.mh-extra.com/html/panasonic/bb-hcm371/bb-hcm371_operating-instructions-manual_277320115.webp)
Operating Instructions
[For assistance, please call: 1-800-272-7033] 115
2.25 Controlling External Output Terminal
The digital output terminal allows you to control the external devices. You can
change the initial status of the output signal.
1.
Click [External Output] on the Setup page.
2.
Click [Save] when finished.
•
Clicking [Cancel] cancels your settings without saving changes.
•
New settings are saved.
•
When finished, "Success!" is displayed.
3.
Click [Go to External Output Control page].
•
The External Output Control page is displayed.
Setting
Description
External Device
Control Output
•
If you check [Open], the internal transistor turns off and the
external output terminal gets high impedance (open
collector) when the camera powers up. If you check [Short
to GND], the internal transistor turns on and is electrically
short-circuited to GND pin when the camera powers up.
The external output terminal gets low impedance (0 V).
Button name
modification
•
You can change the output control button names on the
operation bar. You can name the button depending on your
external devices.
Summary of Contents for BB-HCM371
Page 156: ...Operating Instructions 156 ...
Page 157: ...Operating Instructions 157 Index ...