manualshive.com logo in svg

Panasonic BB-HCM371, Operating Instructions Manual, Page: 124 / 160

Share
Download
Panasonic BB-HCM371 Operating Instructions Manual Download Page 124

Operating Instructions

124

3.1.6

Loading Settings from a Configuration File

The settings can be loaded from a configuration file. If you reset the camera to 
factory default, the camera can load its settings from the configuration file.

Notes

•

The configuration file has network settings. When the settings are loaded, 
the network settings are also loaded as they were saved. 

•

If you try to update the camera, create a configuration file after updating 
the firmware. If there is a firmware version difference between the camera 
that you create a configuration file from and the camera that you try to load 
settings to, the settings may not be loaded to the camera.

1.

Click [Load Settings] on the Maintenance page.

2.

Click [Browse...].

3.

Select the configuration file on the Choose file dialog box, and click [Open].

•

The file name is displayed in the data field.

4.

Confirm the file name, and click [Load].

5.

Click [Restart].

•

The camera restarts, and the Top page is displayed.

Summary of Contents for BB-HCM371

































































































































































Reviews:

No comments