Panasonic AWSW350P - SWITCHER, Service Manual

Page: 9 / 70

INF-1
SOFTWARE VERSION UPGRADE PROCEDURE
The AW-SW350 uses a built-in flash memory. There are 2 ways for the software version upgrade.
1. Version upgrade Method by Personal Computer
A. Preparation
ITEM REMARK
D-sub 50pin-9pin Cable AW-CA50T9
Version Upgrade Software FWC3
Version Upgrade Data mot format file
Personal Computer WINDOWS 95

or 98

B. Version Upgrade Procedure
1. Remove the panel for service which is in the base.
2. Connect the D-sub 50pin –9pin Cable between 50P connector and Personal Computer.
3. Boot up the FWC3.
4. Select the “Comm port” to correspond. (*1)
5. Set the “Writing File “ to correct “mot format file”. (*2)
6. Turn on the power while press the “SETTING” button and the “COLOR”.
(Continue to press the “SETTING” button and the “COLOR” button until the lamps at the “Wipe Pattern”
button light as follows.
7. Click the “Emergency” button on the version up software. (*3)
8. Click the “Start” button to start the programing. (*4)
(*2)
Writing File
(*1)
Comm Port
(*4)
Start button
(*3) Emergency button
： Light
： Unlit