19
Installation
<When the AK-HC910 camera is used>
Attach the positioning 1 screw
(supplied) to the
camera mount
.
Attach the camera mount
to the fan mounting part
on the top panel of the camera using the 1 screw
, flat
washer
and spring washer
(supplied). (The camera
mount points toward the front or back in the opposite
way from a convertible camera. For pointing upward or
downward, make sure that the two sides of the camera
mount are lower than the central area that is attached.)
Attach the lens to the camera.
Remove the lens hood and zoom lever.
<When the AW-E655 camera is used>
Attach the positioning screw
(supplied) to the camera
mounting spacer
.
Use the 2 screws
(supplied) to attach the camera
mounting spacer
to the fan mounting seat
on the
top panel of the camera.
Attach the camera mount
to the camera mounting
spacer
using the 2 screws
, flat washers
and
spring washers
(supplied).
( Make sure that the two sides of the camera mount are
lower than the central area that is attached.)
Attach the lens to the camera.
Remove the lens hood and zoom lever.
The camera mount in the opposite direction from when the AW-E750,
AW-E860 is used as the camera.
To ensure that none of the screws are loose, use a tool to tighten them up securely.
