- 50 -
Color Set Display
1. Chroma Level Adjustment
[Chroma Level: –3 to +3]
Chroma Level can be decreased or increased to any
of three levels each.
2. Skin Color Adjustment [Flesh Tone: –3 to +3]
Skin color can be decreased or increased to any of
three levels each.
3. White Balance Setting
[White Bal: ATW, AWC A, AWC B, P SET 3 200K,
P SET 5 600K]
ATW:
The white balance is automatically adjusted to
be always right.
AWC A, AWC B:
Once the white balance is adjusted
with the ITEM/AWC switch on the back of the
camera, it is no longer necessary to set the white
balance again if you simply select AWC A or AWC
B, provided that the camera is used under the
same conditions.
Fine color adjustment can be made after setting
AWC by red/blue gain adjustment in user mode or
from the RCU (ROP).
P SET 3 200K:
The white balance is adjusted to
3 200K illumination.
P SET 5 600K:
The white balance is adjusted to
5 600K illumination.
4. ATW Speed Setting
[ATW Speed: SLOW 2, SLOW 1, MID, FAST 1,
FAST 2]
ATW Speed can be set.
5. Negative/Positive Selection
[Nega/Posi: Posi, Nega]
Posi:
Normal
image
Nega:
Image is shown reversed in darkness and
color.
K
The negative images can be shown only when the
composite signals and Y/C signals are supplied.
Neither P SET 3 200K nor P SET 5 600K can
be set from the RCU, ROP or the multi hybrid
control panel.
Note
