![background image](http://html.mh-extra.com/html/panasonic/awe300-color-camera/awe300-color-camera_operating-instructions-manual_277301048.webp)
-46-
■
Setting to initial set
In case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of
each Use Mode. (See page 29.)
Press the YES/ABC switch, then [Initialize Data]
screen shown for about 10 seconds.
** Initialize Data **
(Halogen Mode)
Do you want to
initialize Halogen
Mode settings?
O.K. : YES SW
Cancel : NO SW
Halogen Mode
Initialized
Halogen Mode
unchanged
q
w
e
(2) Press the YES/ABC switch within about 10 seconds
to return to the initial settings, the existing settings
are initialized, the screen shown at
w
, and the cam-
era returns to be ready for operation.
(3) If the NO/BAR switch is pressed, or if the YES /ABC
switch is not pressed, within about 10 seconds, the
screen shown at
e
, and the camera returns to the
original settings and is ready for operation.
SETTING TO INITIAL SET