Panasonic AW-UE20KP, Operating Instruction

Page: 103 / 126

103
RTMP Setting
Make RTMP transmission settings.
Click [Setup] > [Network] > [RTMP].
Click [Set] button to save the configuration.
[Note]

Switch to the appropriate method of registering RTMP transmission server information suited to the setting
information notified from the RTMP transmission server you are using.

The Stream Key setting field is displayed only when [Type2] is set.

Please do not change the following menu items during IP streaming: Priority mode, Frequency, Format, Install
Position, and Audio.

When Audio is On, RTMP transmission may not start. (Such an occasion arises when the server to which RTMP
transmission is delivered requires audio transmission.)

If you change Audio from On to Off during RTMP transmission, RTMP transmission may stop.

If you select [3840 x 2160] for Image Capture Size , the selected frame rate may not be obtained.

“Max. bit rate (per client)" is set higher than 8192kbps, the bit rate during RTMPS transmission will be 8192kbps.
URL Type
[Tyep1, Type2]
Select the method for registering the information for the RTMP transmission server. The default is [Type2].
Type1 Specify to set the server URL and RTMP stream key as a set in [Server URL].
Type2 Specify to individually set the server URL and RTMP stream key in [Server URL] and [Stream Key].
Server URL
Set the URL for the RTMP server to be transmitted to.
Stream Key
The stream key obtained from the RTMP server is set during streaming only when the service is set to [Type2].