manualshive.com logo in svg

Panasonic AW-UE100KP, Operating Instructions Manual

Share
Download
Panasonic AW-UE100KP Operating Instructions Manual Download Page 11

Installation Instructions

6. 

Connect the rear panel connectors.

Anchor the AC adaptor cable in place using the cable clamp.

<NOTE>

• Do not connect PoE cable to the RS‑422 port.

• For details on recommended products, refer to the catalog or consult your local dealer.

• Always disconnect the power supply before connecting or disconnecting cables.

Connecting or disconnecting cables while the power is turned on may result in malfunctions.

LAN cable

AC adaptor cable

HDMI cable

Coaxial cable

„

z

How to secure the AC 

adaptor cable

A

  Loosely secure the cable clamp.

Cable clamp

Loosely secure the cable clamp 

in the area shown above.

B

  Fasten the cable clamp.

Strap part

Take hold of the strap part, slide 

the cable clamp until it stops 

moving, and then secure it tightly.

10

11

How to install and connect the unit  (continued)

Summary of Contents for AW-UE100KP

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands