Panasonic AW-RP605AN, Operating Instructions Manual

Page: 5 / 24

5
Setting menus
G/L SETTING
CABLE LENGTH [SHORT]
H PHASE [
±
0]
SC PHASE [COARSE: 1, FINE:
±
0]
CABLE COMP
CABLE COMP AUTO
CABLE COMP MANUAL (Y, C)
CABLE COMP MANUAL (Y Level)
CABLE COMP MANUAL (f Response)
CONTROLLER SETTING
SIGNAL SELECT [C. VIDEO 5 C. VIDEO]
BUZZER SET [ON]
EXT CONTROL OUT [OFF]
COMPONENT [Y/Pr/Pb]
4
MEMORY LENGTH [30s]
HEAD SW (R) FUNCTION [OFF]
VIRTUAL STUDIO MODE [OFF]
Camera Model Select [CAM1=No Camera (CAM2 - CAM5=No Camera)]
P/T SETTING
PAN DIRECTION [NORMAL]
TILT DIRECTION [NORMAL]
ZOOM DIRECTION [NORMAL]
IRIS DIRECTION [NORMAL]
FOCUS DIRECTION [NORMAL]
SPEED SELECT (PAN) [HIGH: FAST, LOW: FAST]
SPEED SELECT (TILT) [HIGH: FAST, LOW: FAST]
SPEED SELECT (ZOOM) [HIGH: FAST, LOW: FAST]
SPEED SELECT (FOCUS) [HIGH: FAST, LOW: FAST]
SPEED WITH ZOOM POS. [OFF]
DIAGONAL MOTION [OFF]
DIAGONAL SPEED [30]
PAN/TILT MIN SPD Set
Backlash Supplement
[PAN=OFF (TILT =OFF, PAN=1, TILT=1)]
Zoom Minimum SPD ADJ [0]
J
J
J
J
J
<Notes>
O
The factory settings are indicated in parentheses.
O
It is possible to switch the speed at which the setting value of the items marked with
J
changes each time the menu setting
control is pressed.
These functions may not work with the AW-RP615AN additional control panel.
The COMPONENT item appears when an RGB card (AW-PB302)
has been installed in the OPTION CARD slot.
With the COARSE setting, it is not possible to switch the speed at which
the setting value changes when the menu setting control is pressed.