- 7 (E) -
Installing the studio card
Always ask your local dealer to install the studio card.
Rear panel
Optional card
slot cover
4 screws (8 mm)
2 screws (6 mm)
Studio card
1
Turn the power to the camera off
and remove any cables which are
connected to the power connector or
other connectors.
2
Loosen the 4 screws (8 mm) on the
rear panel of the camera, then remove
the panel itself.
3
Loosen the screws (6 mm) on the
optional card slot cover, then remove
the cover.
4
Align the studio card with the guides
and insert it.
Ensure the card is fully inserted.
5
Firmly tighten the screws (6 mm) to
the optional card slot.
6
Firmly secure the rear panel with the
4 screws (8 mm).
Note
If the screws are misplaced, use
the extra screws supplied with this
product.
Before installing the studio card:
Release the static carried in the body of the person to perform the installation.
Installation can be performed more safely if an anti-static wrist strap is worn.
Touching the card without first releasing this static may cause malfunctioning.
Do not allow the metal part of the card come in contact with any other metal parts.
